Grain Belt Header Front
Maximize Machinery Efficiency
Hydraulic Header Tilt
The hydraulic header tilt adjustment is equipped with a ball and socket on both ends, improving header floatation.
Adjustable Castoring Gauge Wheels
Adjustment to cutting height is now a breeze — simply pull a pin and push a lever. The Grain Belt Header also has an incredible floatation of eight inches.
Draper Drive
The 3″ (7.6 cm) diameter drive rollers provide traction in heavy crop conditions. Powered from the outside by a hydraulic motor, the drapers move the crop towards the centre for more uniform feeding.
The hydraulically driven reel is easily controlled using standard in-cab controls. In-cab controls allow for quick reel adjustment in changing crop conditions.
Hydraulic Header Tilt
No-wrench header tilt adjustment for header tilt control in varying crop conditions.
SCH Cutting System
The SCH Easy Cut Cutting System provides smooth, superior cutting. Spring steel guards with cutting edges on top and bottom, along with alternating, bolted, heat-treated sections, eliminate the need for hold downs. The system keeps dirt and debris from accumulating under the knives for increased performance in severe cutting conditions
Draper Drive
The 3″ (7.6 cm) diameter drive rollers provide traction in heavy crop conditions. Powered from the outside by a hydraulic motor, the drapers move the crop towards the centre for more uniform feeding.
Fore/Aft Reel Adjustment
A hydraulic adjustment with in-cab control is available for fore/aft positioning for on-the-go response to changing crop conditions with a 16″ operating range.
Skid Plates
UHMW skid plates are standard on all models to protect the cutterbar when cutting crops close to the ground.
Swath Opening
Standard swath opening is 81″ +/- 3″. Double swath standard opening of 46″ +/- 6″. Standard swath opening may be decreased by 14″ or 28″ on some models.
Draper Tension and Tracking
The canvas can be adjusted for tracking and tightening, which allows for even tension on both the front and rear of the rollers. A quick release lever allows for ease of canvas and roller cleaning.
Easy Hook-up Lift Arm Extensions
Lift arm extensions attach to the windrower lift arm using a bolt. The lift arm assembly attaches to the swather using a “no-wrench” single pin attachment. New arms provide for an easy attachment and detachment of the table.
Integral Storage Transport
The self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table.
Hay Guard
The Hay guard ensures a smooth transition from knife to draper and reduces material wrapping on the rollers.
Double Swath
Using two shifting decks, double swath gives you in-cab control for right, left and centre delivery of your windrow. The double swath option is available on 25′, 30′, and 36′ models and is standard equipment on 21′
Dual Wheel Hitch Carrier
Easily tow your combine header behind a pickup truck or combine.
Vertically adjustable with a screw jack and cushioned with a rubber spring for compression and rebound, castoring gauge wheels are available as standard equipment on 30’ and 36′ swather tables. Not available on 21′ and 25′ models. The castoring design eliminates gouging when turning.
Specifications
| WS21 | WS25 | WS30 | WS36 | |
|---|---|---|---|---|
| Width | 21′ (6.4 m) | 25′ (7.6 m) | 30′ (9.1 m) | 36′ (10.9 m) |
| Weight* (no reels or options included) |
2,462 lbs (1,117 kg) |
2,869 lbs (1,301 kg) |
3,513 lbs (1,593 kg) |
4,852 lbs (2,201 kg) |
| Hydraulic System | Supplied by Windrower. | |||
| Header Floatation | Supplied by Windrower. | |||
| Cutting System | SCH Easy Cut, spring steel guards, bolted sections. | |||
| Crary Guard with SCH Knife. | ||||
| Knife Drive | SCH Epicyclic 3 5/16″ (8.4 cm) stroke, hydraulically driven, approximately 1,100 – 1,400 strokes per minute. | |||
| Double | ||||
| Draper | 42″ (106.7 cm) wide rubberized polyester, fibreglass reinforced rubber slats. Hydraulically driven, speed adjustable from approximately 0 – 800 fpm (175.3 mpm). |
|||
| Reel(s) | HB Reel – 6 bat, plastic fingers – standard 5″ spacing – Assembled | |||
| Reel Drive | Standard ‐ using Windrower Hydraulic System c/w one drive motor. Optional – Double Reel Drive motors. Reel speed adjustable in cab. |
|||
| Gauge Wheels | N/A | Standard | ||
| Storage Transport | Standard | |||
| Tires / Wheels / Hubs / Spindles | Standard | |||
| Cutterbar Poly Skid | Standard | |||
| Hay Guard | Standard | |||
| Double Swath | Standard | Optional – Hydraulic Deck Shift. Note: Some restrictions apply. | ||
| Windrower Adapters | John Deere Windrower Models: 4895 – 4995 – A400 – R450 | |||
| Cross Auger Size Specific | N/A | 25′ (7.6 m) (3pc) | 30′ (9.1 m) (3pc) | 36′ (10.9 m) (3pc) |
| Fore / Aft | Standard | |||
| Hydraulic Header Tilt | Standard | |||
| Dual Wheel Hitch Carrier | Optional | |||
- 2021 WS
- 2021 WSP
- 2020 WSA (5.1 MB)
- 2018 W235/W260 (28.3 MB)
- 2017 W235/W260 (28.3 MB)
- 2015 W235/W260 (6.3 MB)
- 2015 A400/R450/4895/4995 (53.1 MB)
- 2014 A400/R450/4895/4995 (4.8 MB)
- 2013 A400/R450 (4 MB)
- 2013 A400/R450 Russian (4.9 MB)
- 2012 A400/R450/4895/4995 (33.1 MB)
- 2012 A400/R450/4895/4995 Russian (15.1 MB)
- 2011 (8.7 MB)
- 2010 (6.5 MB)
- 2009 4895 (3.2 MB)
- 2009 4995 (3.2 MB)
- 2008 4895 (19.9 MB)
- 2008 4995 (17 MB)
- 2008 4895/4995 Russian (29.2 MB)
- 2007 (15.4 MB)
- WSP 2021 (72 MB)
- WSA 2020 9900 Series (19 MB)
- WS 2019 (15.1 MB)
- WSA Agco 2017 (10.5 MB)
- WS 2016 (83.2 MB)
- WS 2015 (63.7 MB)
- WSP 2015 (58.9 MB)
- WS 2014 (83.8 MB)
- WS ST 2013 (19.8 MB)
- 2012 (17 MB)
- 2011 (19.7 MB)
- 2010 (17.2 MB)
- 2009 (19.8 MB)
- 2008 (19.3 MB)
- 2007 (17.7 MB)
- 2006 (16.8 MB)
- 2005 (23.9 MB)
- 2004 (8.9 MB)
- 2003 (9.2 MB)
- 2002 (18.1 MB)
- 2001 (26.7 MB)
- 2000 (81.4 MB)
- 1999 (30.5 MB)
- 1998 (31.7 MB)
