WS Grain Belt Swather
Maximize Machinery Efficiency
Honey Bee lives to make harvests faster and more efficient. If you have a self-propelled haying windrower, the WS Grain Belt Swather table will turn your John Deere power unit into a high-efficiency swather, reducing machinery capital costs and increasing your farming productivity.
Built on a platform that easily attaches to a John Deere windrower, and with increased durability features such as a heavy-duty 3/16″ tubular steel header mainframe, the WS Grain Belt Swather is designed to last. Available in widths from 21’ to 36′, its high capacity is optimal for improved flow of specialty crops like canola. A simple coupling and uncoupling procedure makes the swather easy to transport down narrow roads.
Remote Draper Speed Control
Draper speeds are hydraulically controlled in-cab, and are adjustable up to 800 rpm. Remote draper speed control gives you the power to quickly adjust draper speeds for varying crop conditions.
42″ (106.7 cm) drapers are made of long-lasting, rubberized polyester with fibreglass-reinforced slats and are V-guided to eliminate manual draper tracking.
The hydraulically driven reel is easily controlled using standard in-cab controls. In-cab controls allow for quick reel adjustment in changing crop conditions.
Hydraulic Header Tilt
No-wrench header tilt adjustment for header tilt control in varying crop conditions.
SCH Cutting System
The SCH Easy Cut Cutting System provides smooth, superior cutting. Spring steel guards with cutting edges on top and bottom, along with alternating, bolted, heat-treated sections, eliminate the need for hold downs. The system keeps dirt and debris from accumulating under the knives for increased performance in severe cutting conditions.
The knife is driven by a 3 5/16″ (8.4 cm) stroke, epicyclic knife drive which operates from 1,100–1,400 strokes per minute. The knife drive is driven by a low maintenance hydraulic drive motor. Double knife drive systems are available optional equipment on 25′, 30′ and 36′ models. Standard equipment on 21′.
Fore/Aft Reel Adjustment
A hydraulic adjustment with in-cab control is available for fore/aft positioning for on-the-go response to changing crop conditions with a 16″ operating range.
Standard swath opening is 81″ +/- 3″. Double swath standard opening of 46″ +/- 6″. Standard swath opening may be decreased by 14″ or 28″ on some models.
Draper Tension and Tracking
The canvas can be adjusted for tracking and tightening, which allows for even tension on both the front and rear of the rollers. A quick release lever allows for ease of canvas and roller cleaning.
Using two shifting decks, double swath gives you in-cab control for right, left and centre delivery of your windrow. The double swath option is available on 25′, 30′, and 36′ models and is standard equipment on 21′.
Adjustable Castoring Gauge Wheels
Vertically adjustable with a screw jack and cushioned with a rubber spring for compression and rebound, castoring gauge wheels are available as standard equipment on 30’ and 36′ swather tables. Not available on 21′ and 25′ models. The castoring design eliminates gouging when turning.
|Width||21′ (6.4 m)||25′ (7.6 m)||30′ (9.1 m)||36′ (10.9 m)|
(no reels or options included)
|Hydraulic System||Supplied by Windrower.|
|Header Floatation||Supplied by Windrower.|
|Cutting System||SCH Easy Cut, spring steel guards, bolted sections.|
|Crary Guard with SCH Knife.|
|Knife Drive||SCH Epicyclic 3 5/16″ (8.4 cm) stroke, hydraulically driven, approximately 1,100 – 1,400 strokes per minute.|
|Draper||42″ (106.7 cm) wide rubberized polyester, fibreglass reinforced rubber slats.
Hydraulically driven, speed adjustable from approximately 0 – 800 fpm (175.3 mpm).
|Reel(s)||HB Reel – 6 bat, plastic fingers – standard 5″ spacing – Assembled|
|Reel Drive||Standard ‐ using Windrower Hydraulic System c/w one drive motor. Optional – Double Reel Drive motors.
Reel speed adjustable in cab.
|Tires / Wheels / Hubs / Spindles||Standard|
|Cutterbar Poly Skid||Standard|
|Double Swath||Standard||Optional – Hydraulic Deck Shift. Note: Some restrictions apply.|
|Windrower Adapters||John Deere Windrower Models: 4895 – 4995 – A400 – R450|
|Cross Auger Size Specific||N/A||25′ (7.6 m) (3pc)||30′ (9.1 m) (3pc)||36′ (10.9 m) (3pc)|
|Fore / Aft||Standard|
|Hydraulic Header Tilt||Standard|
|Dual Wheel Hitch Carrier||Optional|
*WS Grain Belt Swather weight Includes: Header c/w Single Swath, Double Knife, Cutterbar Poly Skid (UHMW), Castoring Gauge Wheels, Tires / Wheels / Hubs and Spindles, Hydraulic Fore/Aft, Integral Transport, Windrower Adapter, Hydraulic Header Tilt, Remote Canvas Speed Control, Hay Guard and Reel.
- Download (9 MB)
- Download (0.1 MB)
- Download (0.1 MB)
- Download (59 KB)
- 2021 WS
- 2021 WSP
- 2020 WSA (5.1 MB)
- 2018 W235/W260 (28.3 MB)
- 2017 W235/W260 (28.3 MB)
- 2015 W235/W260 (6.3 MB)
- 2015 A400/R450/4895/4995 (53.1 MB)
- 2014 A400/R450/4895/4995 (4.8 MB)
- 2013 A400/R450 (4 MB)
- 2013 A400/R450 Russian (4.9 MB)
- 2012 A400/R450/4895/4995 (33.1 MB)
- 2012 A400/R450/4895/4995 Russian (15.1 MB)
- 2011 (8.7 MB)
- 2010 (6.5 MB)
- 2009 4895 (3.2 MB)
- 2009 4995 (3.2 MB)
- 2008 4895 (19.9 MB)
- 2008 4995 (17 MB)
- 2008 4895/4995 Russian (29.2 MB)
- 2007 (15.4 MB)
- WSP 2021 (72 MB)
- WSA 2020 9900 Series (19 MB)
- WS 2019 (15.1 MB)
- WSA Agco 2017 (10.5 MB)
- WS 2016 (83.2 MB)
- WS 2015 (63.7 MB)
- WSP 2015 (58.9 MB)
- WS 2014 (83.8 MB)
- WS ST 2013 (19.8 MB)
- 2012 (17 MB)
- 2011 (19.7 MB)
- 2010 (17.2 MB)
- 2009 (19.8 MB)
- 2008 (19.3 MB)
- 2007 (17.7 MB)
- 2006 (16.8 MB)
- 2005 (23.9 MB)
- 2004 (8.9 MB)
- 2003 (9.2 MB)
- 2002 (18.1 MB)
- 2001 (26.7 MB)
- 2000 (81.4 MB)
- 1999 (30.5 MB)
- 1998 (31.7 MB)