fbpx

Pulldozer 1220A Scraper

Built for tough digging

Newly upgraded for 2018, the 20-yard Pulldozer 1220A Ejector-Style Land Scraper!

No piece of equipment takes as much abuse as a scraper; big rocks and hard pulling test these earth-movers during every moment of their operation. With this philosophy in mind, Bridgeview designed every aspect of the 1220A for absolute dependability.

Double your Capacity

The new 1220A is capable of tandem operations. With the purchase of the new rear hitch mount for the new 1220A it allows you to join another 1220A to it or if you have an existing 1220 it now can become a pup in the tandem configuration.


Features

The 1220A features a 20-yard bowl and 131-1/2″ cutting width. The high-backed ejector helps prevent rocks from jamming between the frame and tires and protects the cylinder compartment from material buildup.

The standard GPS Tower sits directly over the blade. The tower is easily removed to accommodate excavator filling if desired.

The standard nitrogen-filled hydraulic dampener provides a better ride for the operator and smoother cylinder function.


Twin 875/65R29 tires allows less resistance in soft conditions.The 132″ outside tire width floats gives good stability on slopes and uneven ground.

The tail section’s removable panel sheds dirt and provides access to push off cylinder.

The heavy-duty 3″ ejection cylinder pushes the ejector plate slightly past the blade edge for total bowl cleanout. Ultra-High Molecular Weight Polyethylene (UHMW-PE) bearing surfaces reduce metal-on-metal sliding contact and resist jamming by gravel. Ejector/apron sequencing is automatic on one remote.

Twin 2″ apron cylinders are shielded from rock impact yet remain accessible for quick inspections. The frame tubing access panels are easily removed for fast checks of the internally-routed hydraulics.


Better performance in tough conditions: Extra-large apron opening ensures smooth unloading in tough conditions. Push-off gate travels slightly past the cutting blade for total cleanout.


Fill Faster: Dropped center blade section acts like a wedge, holding the unit down and keeping the cut level. The available serrated blades penetrate with more force per inch of blade in hard-packed ground, meaning faster filling and less demand on your tractor.

The clean-faced internal bowl design prevents snagging damage when ejecting big rocks or gravel.


Like all pins on the 1220A, the 3-5/8″ cold-rolled lift pivot pin will withstand loads far exceeding those expected in the harshest operating conditions.


Standard 1/2″ Male Ag Tips (Pioneer Style) come installed, with the option of 3/4″ tips. Two hydraulic remotes are required: one for tilt, and one for the combined ejection/apron circuit.

The six-way semi-mount provides a wide range of motion so the scraper follows better.

Unlike other scraper hitches, the standard 1220A hitch allows easy yoke connections while installed, saving significant time when changing implements. Tractor hitch adaptors for numerous popular models are available.


The 1220A comes loaded with smart features. Strategically placed high-strength and hardened steel.
The high-backed ejector plate prevents rocks from wedging between the tires and frame. The smooth, clean design combined with clever hydraulic hose and cylinder concealment ensures absolute dependability.

MRA distributes a diversified selection of specialized equipment to grain, cotton, livestock, viticulture and to a lesser extent, vegetable producers, through a well established and expanding network of Dealers across Australia.